Page 7 - Annual report eng 2019
P. 7
Tycoons Worldwide Group (Thailand) Plc.
constant over the same period. Wire rod comprised the largest proportion of sales in 2019,
accounting for about 45%.
The primary markets for screw in 2019 were the America, Russia and Poland. The
primary markets for annealing wire in 2019 is Vietnam. The primary markets for bolt were
Germany and England.
2.1 Products
2.1.1 Wire Rods
2.1.1.1 Wire Rods in Coil:
Wire rods in coil, with outer diameter 1250mm and inner diameter 850mm,
are made of billets through the process of hot rolling to bars (diameter from
5.5mm to16mm), coiling and strapping.
2.1.1.2 Bars in Coil:
Bars in coil, also named as BIC, with outer diameter 1400mm and inner
diameter 1100mm, are made of billets through the process of hot rolling to
bars (diameter from 17mm to 42mm), coiling and strapping.
The company produces low-carbon wire rods in accordance with TISI
no.348- 2540, while produces high-carbon wire rods in accordance with
TISI no.349-2561.
2.1.2 Reinforcing bars
2.1.2.1 Deformed Bars
Deformed Bars are the product with transverse ribs, longitudinal ribs or gaps
on its surfaces, which reinforce the pull strength between deformed bars and
concrete. Specifications of Deformed bar product are DB10, DB12, DB16,
DB20 and DB25 under Thai SD40 & SD50. Straight deformed bars, with
diameter from 10mm to 12mm, are made of billets through hot rolling and
flying shears.
2.1.2.2 Round Bars
Round bars are made of bars with smooth surface through coiling and
strapping. (Specifications are RB6-RB25).
2.1.3 Annealed Wires
Annealed wires are either finished or semi-finished products which are made of
wire rods through complete or partial processes of intermediate drawing,
spheroidizing, pickling and coating, and skin-pass. Annealed wires are classified
into:
A. Small size annealed wires with diameter no more than 5.5mm
B. Big size annealed wires with diameter from 5.5mm to 29mm.
4