Page 6 - Annual Report English 2018
P. 6
Tycoons Worldwide Group (Thailand) Plc.
Based on the figures above, international sales generally accounted for a greater
proportion of TYCN’s total sales than domestic sales over period from 2016 through
2017, while domestic sales accounted for greater proportion in 2018 Nonetheless, the
relative proportions of wire rods sold in the domestic and foreign markets have
remained largely constant over the same period. Wire rod comprised the largest
proportion of sales in 2018, accounting for about 55.95%.
The primary markets for screw in 2018 were the Poland, Russia, America,
Romania, and Indonesia. The primary markets for annealing wire in 2018 were Taiwan,
Malaysia, and Thailand. The primary markets for bolt were Germany, England,
America, Italy, and Spain.
2.1 Products
2.1.1 Wire Rods
2.1.1.1 Wire Rods in Coil:
Wire rods in coil, with outer diameter 1250mm and inner diameter 850mm
are made of billets through the process of hot rolling to bars (diameter from
5.5mm to16mm), coiling and strapping.
2.1.1.2 Bars in Coil:
Bars in coil, also named as BIC, with outer diameter 1400mm and inner
diameter 1100mm, are made of billets through the process of hot rolling to
bars (diameter from 17mm to 42mm), coiling and strapping.
2.1.2 Reinforcing bars
2.1.2.1 Deformed Bars
Deformed Bars are the product with transverse ribs, longitudinal ribs or
gaps on its surfaces, which reinforce the pull strength between deformed
bars and concrete. Specifications of Deformed bar product are DB10,
DB12, DB16, DB20 and DB25 under Thai SD40 & SD50. Straight
deformed bars, with diameter from 10mm to 12mm, are made of billets
through hot rolling and flying shears.
2.1.2.2 Round Bars
Round bars are made of bars with smooth surface through coiling and
strapping (Specifications are RB6-RB25).
2.1.3 Annealed Wires
Annealed wires are either finished or semi-finished products which are
made of wire rods through complete or partial processes of intermediate
drawing, spheroid zing, pickling and coating, and skin-pass. Annealed
wires are classified into:
A. Small size annealed wires with diameter no more than 5.5mm
B. Big size annealed wires with diameter from 5.5mm to 29mm.
2.1.4 Fasteners
A. Screws
Screws are made of small size annealed wires through head forming, thread
rolling, heat treatment, and surface treatment. Screws can be used together
with rivets to fasten multiple parts.
4